SBD Motorsport
 
MBE Systems
MBE9A4i ECU
 
Launch & Traction Control Output
Launch control on the MBE9A4i can be configured to use up to 7 different launch maps. Each map can be set with the different launch rpm & can be externally selected by the user depending on track conditions.

The launch control is activated with a clutch switch & dash or steering wheel button with a sequence as follows;

Depress the clutch, which activates clutch switch.

Then push steering wheel button, which arms launch.

Release steering wheel button, launch then becomes active.

Depress throttle by desired amount, will bring the engine rpm to your preset launch limiter (according to selected setting)

Then release clutch, the ECU then progresses though the launch map maintaining the programmed rev limits, which you have set to increase over a longer or shorter period of time as desired.

Traction control is being developed to use several strategies, from the simplest type which will be rate of engine change not requiring additional sensors, then rate of change with gear position suitable for cars with sequential gearboxes & finally rate of change with slip requiring wheel speed. This software is under development.

More functions are continuously added to the MBE9A4i, please download Easimap 6 for the latest updates.


SBD Motorsport Ltd

Unit 15, Red Lion Business Park, Red Lion Road, Surbiton, Surrey. KT6 7QD

Tel: 0208 391 0121. Email Contact Details