SBD Customer Cars
SBD Cars
SBD Motorsport Home
SBD Cars
MBE Systems
The MBE9A9 is the most advanced ECU that MBE has released to the motorsport market. The technology put into the ECU has been developed through its many years of production car ECU development which has allowed us to produce a very high level ECU but at an affordable price. MBE & SBD have spent the last 3 years refining the software & user interface ready for high level motorsport use. The ECU has also been tested for the full year by SBD on our own race car prior to its release into the market.

The MBE9A9 has high side & low side drivers, this means you have the option to either drive the outputs directly from the ECU with no relays or use a low side driver to drive it via relay.

Trigger wheel & crank sensors
Crank sensor & trigger wheel
Throttle position
Throttle position sensor
Ignition Coils
Ignition coils
Fueling & Injectors
Water temperature
Water temperature sensor
Air Temperature
Air temperature sensor
Barometric pressure
Barometric pressure sensor
Boost sensor (MAP)
Boost sensor
Lambda Lambda sensor
Fuel pump
Fuel pump
Shift light & Warning systems
Shift light & warning systems
Rain light/Pit lane limiter Rain light and Pit lane limiter
Gearbox Control/Power Shift Power Shift
Programmable Pins
Programmable Pins
  Easimap 6  
Idle control
Idle control
Cam control
Cam Control
Radiator fan
Radiator fan
Generic output
Generic Output
Electric water pump/ PDI water pump
Electric water pump
Turbo Control
Launch Control
Launch Control
Traction Control
Traction control
Data logging/histograms
Data logging/histograms
Data logging/CAN data stream
Data logging CAN data stream
OBD2 Scan Tool
OBD2 Scan Tool
Fault Detection
Fault detection
Easimap 6
  Technical Specification  
  MBE9A9 ECU  
Wiring harness is custom made only, please contact us for our recommended specialist. This wiring harness is very complex & should only be undertaken by a motorsport specialist.
  MBE9A9 Pinout information  
  MBE9A9 Connector layout  
  Mapping Strategy  
MBE9A9-MNT-02K Mounting kit for MBE9A9/9A6 MBE9A9-MNT-02K Mounting kit for MBE9A9/9A6
Mounting kit for MBE9A9/9A6 MBE9A9-MNT-02K
  Pneumatic gearshift components  
Kill Switch
Mark Smith at Pembrey June 2011
The SBD Reynard runs MBE9A9 ECU and Mark Smith finished 1st in Class & 2nd Overall in British Sprint Championship 2015
Mike Field
Mike Field's Stohr uses the MBE9A9, competing in the 750 Motor Club Bike Sports Championship
Trevor Willis
Trevor Willis has been running this system on both his V8 Hayabusa powered OMS25 & OMS28.
Trevor Willis
Mark Straker has been running this system his 2.5L Millington powered Darrian T90 rally car with great success
All ECUs are fully tested during manufacture
Back to MBE ECUs & Software index | Programming your engine

Home | Price List | Site Map | Contact Us
Events | Press Coverage | Meet the Staff | Frequently Asked Questions | Distributors, Dealers & Links | Sponsorship | Terms & Conditions | Privacy Policy
SBD Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton, Surrey. KT6 7QD. Tel: 0208 391 0121.
Email Contact Details | Like us on Facebook | Follow us on Twitter