SBD Customer Cars
SBD Cars
SBD Motorsport Home
SBD Cars
 
2.0L Vauxhall Fuel Injection - Taper throttle bodies
 
We have fuel injection kits for 2.0L Vauxhall engines, which consists of the inlet manifold, throttle bodies, fuel rail, air horns, injector clips, o-rings & complete fitting instructions. Please specify whether you will be using peco or standard injectors, so the correct fuel rail can be provided.
These parts can be purchased separately.
Please view our complete Taper throttle engine kits for 2.0L Vauxhall engines.
 

TP-VX-2.0-K3

The tapered throttle body system which Richard Jenvey and Steve Broughton of SBD Motorsport have developed back in 1995 for the 2.0L XE originally at that time for a touring car project which has been so successful, even spawning many copies.

We decided that the fact that the 2.0L XE was still very popular, that is was time to look at the design again which everything that we had learnt in developing the Hayabusa and Duratec high specification throttle bodies. We contacted Jenvey Dynamics again, who have helped us to develop all our own special throttle body projects over the years and started designing a new intake system to suit the 2.0L XE as well as it's larger capacity versions, 2.2L, 2.3L, 2.4L & 2.5L which are now being built.

We incorporated all the latest designs and developments into the system and the first prototype was ready for testing for the beginning of December. One of our main dealers had a test engine ready that could have the throttle system tested immediately, so it was shipped to Ivan Orr at Cormeen Motorsport and fitted to his 2.3L XE engine. He carried out back to back tests with our original throttle system in the morning, then fitted the new system and carried out the same tests in the afternoon. The initial results are even better than we had hoped, we saw an increase in peak torque of 14lbft and an increase in bhp of 13bhp, in fact the torque curve had improved everywhere from 2500rpm upwards. Ivan is now getting a 2.0L XE engine ready to carry out a similar test and has already sold the first system to one of his customers.

The tapered throttle body has a 54mm entry tapering down to a 52mm butterfly. The taper then continues on through the throttle body then into the manifold and down to the cylinder head. The size of the inlet duct where it meets the cylinder head is 48mm wide x 32.50mm high. The port shape we have developed to match up with our high specification CNC ported cylinder head, this means the inlet manifold should not require any porting when mated to one of these cylinder heads.
2.0L Vauxhall XE 2012 SBD Taper throttle body kit
The injectors are now mounted underneath the throttle body pointing at an upwards direction at the correct angle so that upon butterfly opening high gas speed is achieved allowing very fast throttle response. Because the injector is mounted much higher up the inlet track, this allows improved air/fuel mix, which we have found in many tests to give identical improvements to that seen with an 8-injector set up but also allows for reduced complexity. Great care has also been taken to ensure that the package is very neat and compact as possible, which means we can use a flat air filter back plate without the need for any complex stepped back plates.

The system comes with a build in single cable throttle linkage mounting assembly, but we have designed options that will allow the use of the more traditional single or twin cable Jenvey throttle linkage kit, see below.

The overall length of the system including airhorns is identical to the length of our earlier system TP2K. This means that any customers using the original system with 90mm air horns can easily upgrade to the latest system.

Fitting & setting up instruction sheet for TP-VX-2.0-K3

TP-VX-2.0L-K3 Dimensions

2.0L Vauxhall XE 2012 SBD Taper throttle body kit
The kit includes inlet manifold, throttle bodies, air horns, fuel rail and throttle cable bracket. It will come assembled as shown in the pictures below, but without the injectors as these depend on your installation.
TP-VX-2.0-K3 Vauxhall 2012 taper throttle body kit TP-VX-2.0-K3 Vauxhall 2012 taper throttle body kit
 
Throttle cable kits

We have produced a high quality throttle cable kit, which is extremely flexible. The cable itself is 3m long. It is complete with SBD inline adjuster & ends, the user can then alter the length of the throttle cable to suit their own application. The cable length should suit anything from rear engined cars to front engined cars. The inline adjuster can then be mounted in the most suitable position for access. Ideally suited to our current generation of high specification Duratec, XE and Hayabusa kit, which have built in throttle cable brackets.

TC-K2
TC-K3 SBD throttle cable kit

TC-K3 SBD High Specification Throttle Cable Kit (shown left)

Comprises of the kits below, which are available separately.
TC-K2 High Specification Throttle Cable Kit, inc adjuster + finisher (shown right)
TC-ADJ-01K SBD Inline Throttle Cable Adjuster (shown below)

Fitting instructions

TC-ADJ-01K

TLK-K3-LH-01 Throttle cable fitting kit for left hand set up

For those customers who prefer the more traditional style throttle linkage kit either single or twin cable Jenvey type, we have a fitting kit which suits both the Vauxhall and Duratec high specification throttle bodies with option for either left or right end set up. They can be used in conjuction with both the TLK-CLS1 or TLK-CLS2.

TLK-K3-LH-01 Throttle cable fitting kit for left hand set up (shown left)
TLK-K3-RH-01 Throttle cable fitting kit for right hand set up (shown right)

TLK-K3-RH-01 Throttle cable fitting kit for right hand set up
TLK-CLS-1 Single cable throttle linkage kit TLK-CLS-2 Twin cable throttle linkage kit
TLK-CLS-1 Single cable throttle linkage kit TLK-CLS-2 Double cable throttle linkage kit
TLK-CLS-1-&-TLK-K3-RH-01-on-TP-VX-2-0-K3 TLK-CLS-2-&-TLK-K3-RH-01-on-TP-VX-2-0-K3

TP2K 2.0L Fuel injection kit

 

TP2K
Fuel injection kit for the Vauxhall 2.0L shown with standard fuel rail & 90mm air horns. Complete with inlet manifold, taper throttle bodies, fuel rail, air horns, injector clip, o-rings, bolts & fitting instructions.

TP5
Water elbow for 2.0L Vauxhall.
TP5 2.0L Water elbow
The parts of the TP2K are available separately
TP7K 2.0L Inlet manifold & fuel rail
TP8K Taper throttle bodies & air horn kit
TP7K
Inlet manifold and fuel rail kit for the Vauxhall 2.0L
TP8K
Taper throttle bodies & air horns for both 1.6L & 2.0L Vauxhall engines
 
TP3 Fuel rail TP3-P Peco Fuel rail
TP3 Fuel rail for 2.0L for use with Bosch injectors TP3-P Peco Fuel rail for 2.0L for use with peco injectors
 
TLK-2.0XE-SBD-01 2.0L XE Throttle linkage kit

Throttle Cable Linkage Kits & Brackets

TLK-2.0XE-SBD-01

Throttle linkage kit including bracket & throttle cable for our 2.0L taper throttle kit. We have designed this new very simple kit, easy to assemble & set up. It uses a very high quality single cable so there is no need for a twin cable system.

TLK-CLS-1 Throttle linkage kit

 

TLK-CLS-1Throttle Linkage kit suitable taper throttle kits, shown with bracket kit (shown on throttle bodies below)

Also available: TLK-CLS-2 Twin cable throttle linkage kit

TLKB-1

Taper Throttle linkage Bracket kit

TLK-CLS-1 & TLBK1
 
Injectors | Multi-throttle bodies

Home | Price List | Site Map | Contact Us
Events | Press Coverage | Meet the Staff | Frequently Asked Questions | Distributors, Dealers & Links | Sponsorship | Terms & Conditions | Privacy Policy
SBD Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton, Surrey. KT6 7QD. Tel: 0208 391 0121.
Email contact details | Like us on Facebook | Follow us on Twitter