was designed for use of on the 1500cc & 1600cc versions of the Suzuki
Hayabusa. The kit comprises of MBE9A4 ECU, Wiring Harness, injectors & SBD taper throttle bodies (type dependant on your engine).
Williams Dallara Suzuki Hayabusa 1585cc has MBE9A4, wiring
harness & SBD throttle bodies & used for hillclimbing.
Adams' Raptor with 1585cc Extreme engine, MBE9A4 ecu, MBE995,
wiring harness & SBD throttle bodies & used for hillclimbing.
Newman of Gold Arts circuit racing teams 1585cc Hayabusa
powered Caterham with this kit.
accurate, very small & compact fuel regulator 3 Bar (44.1
PSI) with mounting body -6 type
injection pump fuel filter, injection pumps are not very efficient
at sucking fuel & it is recommended that they have the
less restriction possible in their supply line. We normally
recommend a minimum of -8JIC (or 12mm push on).
fuel pump high pressure suitable for use outside the fuel
tank & any engine up to 320 bhp. This pump is supplied
with a choice of either 12mm diameter inlet or -8JIC inlet.
The outlet has a choice of either 8mm push on or -6JIC
AR-BP-BUSA-1/JC40 Air filters back plate
AR-FS40-065 Air filter sausage available in three sizes, AR-FS40-100 AR-FS40-125
Blackmore runs this set up on 1600cc Busa powered OMS. He has
been the Harewood FTD Championship for 2006 & 2007.
He is still running this engine in his OMS25, shown right at Gurston Down Hillclimb May 2012. Picture:Kim Kingham